MB1000 Controller
The MB1000 Controller is network centric, and high-performance Digital Outputs Controller to accommodate general and specific applications, featuring Modbus RS-485.
High Speed Modbus RTU communication
Supports multiple serial communication (RS-485) speed selection from 9.6kbps to 115.2kbps.
Varies Input Type
Operational activity on each individual channel of DOs are conveniently indicated by LED, so as the Power, Operation and Communication.
Ease Communication
With Modbus RTU standard protocols, These IO modules configure as slaves will be easy to communicate with Modbus master such as SCADA/PLC/HMI.
Digital Output:
• 10 Channels
• Type: Relay Contacts, SPST NO, Pilot Duty
– Max Rating: 5A, 250VAC/30VDC
• Life expectancy Electrical: 200,000
Communication:
Physical Interface:
• EIA-485 Standard (Bus A, B) two-wire
• Half Duplex
• Data Bit: 8 bits
Application Protocol:
• Modbus Slave
• Baud Rate Speed: 9.6k, 19.2k, 38.4k, 57.6k, 115.2k bit/s
• Multi-drop Capability: Yes (Hardware ID Setting)
• Integrated termination resistor, enabled through Modbus register
Status Indicator:
• Power Status LED
• Operation Status LED
• Communication Status LED
• Digital Output Status LEDs
Supply Connection & Environmental Limits:
• Power Supply: 24VAC ± 5% or 24 VDC ± 5%
• Consumption: 150mA max
• Operating Temperature: 32° to 150° F (0° to 65° C)
• Storage Temperature: −4° to 150° F (−20° to 65° C)
• Operating Humidity: 10% to 95% HR (non-condensed)
Mechanical:
• Dimension: 132mm (L) × 80mm (W) × 38mm (H)
• Material: ABS