Previous
Next
MB1000 MODULE
The MB1000 Controller is network centric, and high-performance Digital Outputs Controller to accommodate general
and specific applications, featuring Modbus RS-485.
General Features
Specifications
General Features
High Speed Modbus RTU communication
Supports multiple serial communication (RS-485) speed
selection from 9.6kbps to 115.2kbps.
Varies Input Type
Operational activity on each individual channel of DOs are
conveniently indicated by LED, so as the Power, Operation and
Communication.
Ease Communication
With Modbus RTU standard protocols, These IO modules
configure as slaves will be easy to communicate with Modbus
master such as SCADA/PLC/HMI.
Specifications
Digital Output:
- 10 Channels
Type: Relay Contacts, SPST NO, Pilot Duty - Max Rating: 5A, 250VAC/30VDC
- Life expectancy Electrical: 200,000
Communication:
Physical Interface:
- EIA-485 Standard (Bus A, B) two-wire
- Half Duplex
- Data Bit: 8 bits
- Application Protocol:
o Modbus Slave - Baud Rate Speed: 9.6k, 19.2k, 38.4k, 57.6k, 115.2k bit/s
- Multi-drop Capability: Yes (Hardware ID Setting)
- Integrated termination resistor, enable through Modbus
register
Status Indicator:
- Power Status LED
- Operation Status LED
- Communication Status LED
- Digital Output Status LEDs
Supply Connection & Environmental Limits
- Power Supply: 24VAC ± 5% or 24 VDC ± 5%
- Consumption: 150mA max
- Operating Temperature: 32° to 150° F (O° to 65° C)
- Storage Temperature: -4° to 150° F (-20° to 65ª C)
- Operating Humidity: 10% to 95% HR (non-condensed)
Mechanical:
- Dimension: 132mm (L) x 80mm (W) x 38mm (H)
- Material: ABS